Installation guide card terminals
  • 15 Jan 2023
  • Dark
    Light
  • PDF

Installation guide card terminals

  • Dark
    Light
  • PDF

Article summary

IPP350

To be able to add a terminal, you must have activated the payment method "Swedbank Pay" in Backstage. Then you need to ensure that the terminal is connected to the same network as the cash register (connected via the same router).

Before you connect the terminal to the cash register, you first need to start TMS update (load parameters) on the terminal by:

  1. Press F3
  2. Enter 1234
  3. Press OK [Green button]
  4. Press 2 Payex
  5. Press 7 Systeminställningar
  6. Press 4 Starta TMS-uppdatering

When the update is done will the card terminal be restarted. The terminal's IP address will appear in the display, note this you will use that later when you connect the terminal to the cash register.

Always contact support if problems occur with TMS update.


Connect IPP350 to the cash register



If you have a terminal added to your cash register already, you must remove the current connection. Do the following steps:

  1. Press(My Store)
  2. Press Payment Terminals
  3. Press Forget Terminal

To connect your card terminal to the cash register, do the following steps:

  1. Press(My STore)
  2. Press Payment Terminals
  3. Press Add Terminals
  4. Enter the card terminal IP-address 
  5. Press Add Terminal

Restart IPP350


Restart the terminal by pressing Clear [Yellow button] + [ .,’ ]-button

You can also restart the terminal by:

  1. Press F3
  2. Enter 1234
  3. Press OK [Green]
  4. Press 2 (Payex)
  5. Press 7 (Systeminställningar)
  6. Press 5 (Starta om terminal)


Load parameters IPP350


Start TMS-update (load parameters):

  1. Press F3
  2. Enter 1234
  3. Press OK [Green]
  4. Press 2 (Payex)
  5. Press 7 (Systeminställningar)
  6. Press 4 (Starta TMS-uppdatering)


Remove connected Swedbank terminal in the cash register


If you have a terminal added to your cash register and want to remove the connection. Do the following: 

  1. Press(My Store)
  2. Press Payment Terminals
  3. Press Forget Terminal


Show current IP address on IPP350


If the terminal is set to DHCP (get IP address automatically, it will appear on the display after restart)
To check the IP address do the following:

  1. Press F3
  2. Enter 1234
  3. Press OK [Green]
  4. Press 0 (Telium Manager)
  5. Press 1 (Consultation)
  6. Press 4 (Configuration)
  7. Press 1 (Hardware)
  8. Press [F2]
  9. Step down 3 times (Hardware Infos)
  10. Press OK [Greeen]
  11. Press [F2] 
  12. Step down 7 times (Ethernet)
  13. Press OK [Green]

Was this article helpful?

What's Next
Changing your password will log you out immediately. Use the new password to log back in.
First name must have atleast 2 characters. Numbers and special characters are not allowed.
Last name must have atleast 1 characters. Numbers and special characters are not allowed.
Enter a valid email
Enter a valid password
Your profile has been successfully updated.