- 01 Oct 2024
- Print
- DarkLight
- PDF
Installation guide mPop
- Updated on 01 Oct 2024
- Print
- DarkLight
- PDF
Step 1 (Unbox the iPad)
Unbox the iPad and turn it on
Step 2 (Connect iPad to WiFi)
- Open Settings, tap Wi-Fi.
- Choose your network in the list and enter the password.
Ifappears at the top of the screen, iPad is connected to a Wi-Fi network. (You can confirm it by opening a web page in safari)
Step 3 (Power on rmPop drawer)
Pick up the drawer and plug it into a power outlet. You can attach the cable in the bottom at two different ways, se picture.
Step 4 (Connect USB-C cable to mPop)
Connect theincluded USB cable to your receipt printer in the port labeled iPad and the other part of the cable to your iPad. The iPad is powered by the receipt printer.
Step 5 (Start receipt printer)
Start the receipt printer by pressing the power button, there is LED indicators at the top of the drawer that should light up when it's started.
Step 6
- Start the Yabie app on your iPad
- Log in
- Enter your enable and press log in
- Enter your 6-digit password and confirm
Step 7
If your product catalog, price list and store configuration have, it means that everything is updated on your device and you are ready to start taking payments.
Click Ok, get started to log in to your checkout and start selling.
Step 8
Plug in your card terminal, plug in all cables before plugging it into the power outlet.
When the terminal starts up, the terminal's IP address will appear in the display, write it down, it will be used later.
- Press(My store)
- Press Payment terminals
- Press Add Terminals
- Fill in the terminal's IP address
- Press Add Terminal