--- title: "Swedbank IPP" slug: "installationsguide-kortterminal" updated: 2025-09-19T07:45:05Z published: 2025-09-19T07:45:05Z canonical: "support.yabie.com/installationsguide-kortterminal" --- > ## Documentation Index > Fetch the complete documentation index at: https://support.yabie.com/llms.txt > Use this file to discover all available pages before exploring further. # Swedbank IPP > [!NOTE] > **Important information regarding Swedbank IPP350 & Swedbank IWL** These terminals will be phased out during 2025 and 2026. If you have an IPP350 or an IWL, we recommend that you contact us at [sales@yabie.com](mailto:sales@yabie.com), and we will assist you with a newer, more modern alternative. --- ## IPP350 To be able to add a terminal, you must have activated the payment method "Swedbank Pay" in Backstage. Then you need to ensure that the terminal is connected to the same network as the cash register (connected via the same router). Before you connect the terminal to the cash register, you first need to start TMS update (load parameters) on the terminal by: 1. Press F3 2. Enter 1234 3. Press OK [Green button] 4. Press 2 Payex 5. Press 7 Systeminställningar 6. Press 4 Starta TMS-uppdatering When the update is done will the card terminal be restarted. The terminal's IP address will appear in the display, note this you will use that later when you connect the terminal to the cash register. Always contact support if problems occur with TMS update. ## Connect your IPP to the POS Om du har en terminal tillagd i din kassa redan måste du ta bort den anslutningen. Gör följande: 1. Tryck på (Min butik) 2. Tryck på **Betalterminaler** 3. Tryck på **Glöm terminal** För att ansluta din kortterminal till kassan gör du följande steg: 1. Tryck på (Min butik) 2. Tryck på **Betalterminaler** 3. Tryck på **Lägg till terminaler** 4. Fyll i terminalens IP-adress 5. Tryck på **Lägg till terminal** --- ## Starta om IPP350 Starta om terminalen genom att trycka **Clear** [Gul knapp] + **[ .,’ ]**-tangenten Du kan också starta om terminalen genom att: 1. Tryck **F3** 2. Ange **1234** 3. Tryck **OK** [Grön] 4. Tryck **2** (Payex) 5. Tryck **7** (Systeminställningar) 6. Tryck **5** (Starta om terminal) --- ## Ladda parametrar IPP350 Starta TMS-uppdatering (ladda parametrar): 1. Tryck **F3** 2. Ange **1234** 3. Tryck **OK** [Grön] 4. Tryck **2** (Payex) 5. Tryck **7** (Systeminställningar) 6. Tryck **4** (Starta TMS-uppdatering) --- ## Ta bort kopplad Swedbank terminal i kassan Om du har en terminal tillagd i din kassa och vill ta bort anslutningen. Gör följande: 1. Tryck på (Min butik) 2. Tryck på **Betalterminaler** 3. Tryck på **Glöm terminal** --- ## Visa aktuell IP-adress på IPP350 Om terminalen är inställd på DHCP (få IP adress på automatik så visas den på displayen vid omstart) - [Starta om terminalen](/yabie-express/docs/swedbank-pay#starta-om-ipp350) För att kolla IP adress gör följande: 1. Tryck **F3** 2. Ange **1234** 3. Tryck **OK** [Grön] 4. Tryck **0** (Telium Manager) 5. Tryck **1** (Consultation) 6. Tryck **4** (Configuration) 7. Tryck **1** (Hardware) 8. Tryck **[F2]** 9. **Stega ned** 3 x ggr (Hardware Infos) 10. Tryck **OK** [Grön] 11. Tryck **[F2]** 12. **Stega ned** 7 x ggr (Ethernet) 13. Tryck **OK** [Grön] ## ## **Connect IPP350 to the cash register** --- **If you have a terminal added to your cash register already, you must remove the current connection. Do the following steps:** 1. Press![](https://cdn.document360.io/ff6b6016-e382-4ff8-9139-40f0d89ab62c/Images/Documentation/IMG_6373(1).png?sv=2026-02-06&spr=https&st=2026-11-10T18%3A10%3A46Z&se=2026-11-10T19%3A10%3A46Z&sr=c&sp=r&sig=1dB%2FYsnYUCNAlSOa61wtFkR%2Fd3C0iXkWjeyn5QKst2A%3D)(My Store) 2. Press **Payment Terminals** 3. Press **Forget Terminal** To connect your card terminal to the cash register, do the following steps: 1. Press![](https://cdn.document360.io/ff6b6016-e382-4ff8-9139-40f0d89ab62c/Images/Documentation/IMG_6373(1).png?sv=2026-02-06&spr=https&st=2026-11-10T18%3A10%3A46Z&se=2026-11-10T19%3A10%3A46Z&sr=c&sp=r&sig=1dB%2FYsnYUCNAlSOa61wtFkR%2Fd3C0iXkWjeyn5QKst2A%3D)(My STore) 2. Press **Payment Terminals** 3. Press **Add Terminals** 4. Enter the card terminal IP-address 5. Press **Add Terminal** [Embedded content](https://www.youtube.com/embed/ta_yGIrCR_E?&wmode=opaque&rel=0) ## **Restart IPP350** --- Restart the terminal by pressing Clear [Yellow button] + [ .,’ ]-button You can also restart the terminal by: 1. Press **F3** 2. Enter **1234** 3. Press **OK** [Green] 4. Press **2** (Payex) 5. Press **7** (Systeminställningar) 6. Press **5** (Starta om terminal) ## ## **Load parameters IPP350** --- Start TMS-update (load parameters): 1. Press **F3** 2. Enter **1234** 3. Press **OK** [Green] 4. Press **2** (Payex) 5. Press **7** (Systeminställningar) 6. Press **4** (Starta TMS-uppdatering) ## ## **Remove connected Swedbank terminal in the cash register** --- If you have a terminal added to your cash register and want to remove the connection. Do the following: 1. Press![](https://cdn.document360.io/ff6b6016-e382-4ff8-9139-40f0d89ab62c/Images/Documentation/IMG_6373(1).png?sv=2026-02-06&spr=https&st=2026-11-10T18%3A10%3A46Z&se=2026-11-10T19%3A10%3A46Z&sr=c&sp=r&sig=1dB%2FYsnYUCNAlSOa61wtFkR%2Fd3C0iXkWjeyn5QKst2A%3D)(My Store) 2. Press **Payment Terminals** 3. Press **Forget Terminal** ## **Show current IP address on IPP350** --- If the terminal is set to DHCP (get IP address automatically, it will appear on the display after restart) To check the IP address do the following: 1. Press **F3** 2. Enter **1234** 3. Press **OK** [Green] 4. Press **0** (Telium Manager) 5. Press **1** (Consultation) 6. Press **4** (Configuration) 7. Press **1** (Hardware) 8. Press **[F2]** 9. **Step down** 3 times (Hardware Infos) 10. Press **OK** [Greeen] 11. Press **[F2]** 12. **Step down** 7 times (Ethernet) 13. Press **OK** [Green]